MIX-H310D1

Overview

The MIX-H310D1 mini-ITX board from AAEON is a compact, low-profile board with a range of interfaces including m.2 card slot. The MIX-H310D1 offers flexible display configurations, supporting two DP, two HDMI or DP+HDMI ports. The MIX-H310D1 is a budget friendly embedded board able to be customized by the customer and deployed in tight spaces where power is needed.

Features

8th/9th Gen. Intel® Core™ LGA1151 Processor
DDR4 SODIMM x 2, Up to 32 GB
Two Independent Display: DP, HDMI, eDP, LVDS
M.2 Slot (M-key, 2242) x 1, M.2 Slot (E-key) x 1
PCIe [x4] x 1
Low Profile
12V DC Power Input
USB 3.2 Gen 1 x 4, USB 2.0 x 5

Specifications [MIX-H310D1]

system
processor	8th/9th Gen. Intel® Core™ LGA 1151 socket Processor (formerly Coffee Lake-S), Max. 65W TDPs
Chipset	Intel® H310 Express Chipset
Memory	DDR4 2666 MHz SODIMM x 2, Up to 32GB, Non-ECC, Un-buffered Memory, Dual channel memory architecture
I/O Chipset	NCT6793D
Ethernet	Realtek ® PCIe Gb LAN RTL8111H
Audio	Realtek® ALC887 with Amp.
TPM	NPCT650ABBYX TPM2.0 (default: No)
Expansion Slot	PCIe3.0 [x4] x 1 M.2 E-key(22 x 30 mm) x1 for Wireless-wifi module ( PCIe+USB)
BIOS	128Mbit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/12V, Fan Monitor on CPU/Chassis
Watchdog Timer	1~255 steps by software program
Smart Fan Control	CPU Fan/ Chassis Fan
Wake On LAN/ PXE	Yes (WOL / PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	HDMI1+HDMI2, HDMI1+DP2, DP1+HDMI2, HDMI1+LVDS, HDMI2+LVDS, HDMI1+eDP, HDMI2+eDP, DP1+DP2, DP1+LVDS, DP2+LVDS, DP1+eDP, DP2+eDP
VGA	—
DVI	—
HDMI	Up to 4096×2304@24Hz(HDMI 1.4b)
DisplayPort	Up to 4096×2304@60Hz
LVDS	Up to 1920 x 1200 @ 60 Hz, Dual Channel 18/24 bit (via CH 7511)
eDP	UP to 4096 x 2304 @ 60Hz
Backlight Control	Voltage/PWM
environmental & power & me
Battery	Lithium battery
Power Requirement	12V DC
Operating Temperature	32°F ~140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~185°F (-40°C ~85°C)
Operating Humidity	0%~90%RH, non-condensing
Certification	CE & FCC
Form Factor	Mini-ITX: 6.7” x 6.7” (170mm x 170mm)
Weight	1.1 lb (0.5 Kg)
MTBF (hours)	246,210
Rear i/o ports
USB	USB 3.2 Gen 1 (5 Gbps) x 4
Display I/O	HDMI x 2, DP x 1+ HDMI x 1(Optional), DP x 2 (Optional)
Audio I/O	Mic-in x 1, Line-out x 1
LAN I/O	LAN (RJ-45) port x 2
Serial Port	—
PS/2 Port	—
Others	DC Jack
internal i/o connectors
Storage	SATA3.0 (6.0Gb/s) x 2, M.2 M-key(SATA) (22 x 42mm) x 1
USB	USB 2.0 (2 x 5-pin, 2.00mm) x 3 ports support additional 5 USB.
Display I/O	—
Audio I/O	AAFP x 1, Speaker header x 1
Serial Port	Boxer header for COM (RS-232/422/485) x 1, Boxer header for COM (RS-232) x 1
PS/2 Port	—
Parallel Port	—
DIO	Digital I/O box header x 1
Fan	4-pin CPU Fan connector x 1, 4-pin Chassis Fan connector x 1
Power	—
Others	Front Panel connector x 1, Chassis Intrusion x 1, Buzzer onboard x 1, CMOS jumper x 1
os
OS support	Windows® 10 64-bit Linux Ubuntu 18.04 LTS

Ordering Information [MIX-H310D1]

Part Number	MIX-H310D1-A10-HH
cpu	Socket
ram	SODIMM x 2
fan/fanless	Fan
display	Daul HDMI, eDP, LVDS
storage	SATA3 x 2, M.2 (M-key; SATA)
lvds	Daul Channel 18/24 bit
lan	GbE x 2
usb	USB 2.0 x 5 USB 3.2 Gen 1 x 4
rs-232	1
rs-232/422/485	1
expansion slot	PCIe3.0[x4] x 1, M.2 (E-Key) x 1
power	12V DC
tpm	—
temp	32°F ~140°F (0°C ~ 60°C)

Packing List

SATA Cable
SATA Power Cable
I/O Shield
MIX-H310D1

Optional Accessories

Part Number	Description
1759200172	(TF)CPU Cooler Fan, LGA 1156 socket, 4P, 12V, 2-Ball Bearing, Dynatron, K785, (2U cooler)
175921156B	(TF)CPU Cooler Fan, LGA 1156 socket, 12V, 4P, 2Ball (Tray), Dreamer, DSA-00273
COOLER-65W-01	CPU Cooler, LGA 1156, 12V, 65W, 4P, Kingcooler, 0571-1463R
1709100201	USB 2.0 Cable (10P, 200mm, p=2.00mm, w/bracket)
1700100491	USB 2.0 Cable (2 x 5P, 490mm, p=2.00mm)
1709050201	USB 2.0 Cable (5P, 220mm, p=2.00mm)
1701100206	COM Cable (200mm, p=2.00mm)
1702150300	SATA Power Cable (4P, 300mm p=2.54mm)
1702151201	SATA Power Cable (4P, 120mm, p=2.5mm)

MIX-H310D2

Overview

Mini-ITX with Intel® 8th / 9th Generation Core™ LGA1151 Socket Processor, Max. 65W TDPs, USB 3.2 Gen 1 Port x 4, USB 2.0 Port x 5, 12V DC input

Features

8th /9th Gen. Intel® Core™ LGA1151 Processor
DDR4 DRAM Support, 2666MHz, Max. 64GB
M.2 Slot (M key; PCIe) x 1, M.2 Slot (E key) x 1
USB 3.2 Gen 1 Port x 4, USB 2.0 Port x 5
Intel® Gigabit Ethernet x 2
SATA 6.0 Gb/s x 2
PCI-Express [x16] (Gen3) x 1
12VDC input

Specifications [MIX-H310D2]

system
processor	8th/9th Gen. Intel® Core™ LGA 1151 socket Processor (formerly Coffee Lake-S),Max. 65W TDPs
Chipset	Intel® H310 Express Chipset
Memory	DDR4 2666/2400/2133 MHz SODIMM x 2, Up to 64GB, Non-ECC, Un-buffered Memory, Dual channel memory architecture
I/O Chipset	NCT6793D
Ethernet	Intel® GbE LAN i219V x 1, Intel® GbE LAN i211AT x 1
Audio	Realtek® ALC887
TPM	NPCT750AABYX TPM2.0 (default: No)
Expansion Slot	PCIe3.0 [x16] x 1 M.2 E-key(22 x 30 mm) x1 for Wireless-wifi module ( PCIe+USB; CNVi)
BIOS	256Mbit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/12V, Fan Monitor on CPU/Chassis
Watchdog Timer	1~255 steps by software program
Smart Fan Control	CPU Fan/ Chassis Fan
Wake On LAN/ PXE	Yes (WOL / PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	HDMI+HDMI, HDMI+eDP, HDMI+VGA, VGA+eDP
VGA	Up to 1920 x 1200 @ 60 Hz (Optional)
DVI	—
HDMI	Up to 3840 x 2160 @30 Hz(HDMI 1.4)
DisplayPort	—
LVDS	—
eDP	UP to 4096 x 2304 @ 60Hz
Backlight Control	Support eDP
environmental & power & me
Battery	Lithium battery
Power Requirement	12V DC
Operating Temperature	32°F ~140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~185°F (-40°C ~85°C)
Operating Humidity	0%~90%RH, non-condensing
Certification	CE & FCC
Form Factor	Mini-ITX: 6.7″ x 6.7″ (170 mm x 170 mm)
Weight	1.1 lb (0.5 kg)
MTBF (hours)	373,720
Rear i/o ports
USB	USB 3.2 Gen 1 x 4, USB 2.0 x 4
Display I/O	HDMI x 2, VGA x 1 (Optional)
Audio I/O	Mic-in x 1, Line-out x 1
LAN I/O	LAN (RJ-45) port x 2
Serial Port	—
PS/2 Port	—
Others	12V DC Jack (max:192W)
internal i/o connectors
Storage	SATA3.0 (6.0Gb/s) x 2 M.2 M-key (22 x 42/80mm; PCIe) x 1
USB	USB 2.0 (2 x 5-pin, 2.00mm) x 1 port support additional 1 USB
Display I/O	eDP x 1
Audio I/O	AAFP x 1
Serial Port	Boxer header for COM (RS-232) x 1; RS-232/422/485 x 1
PS/2 Port	—
Parallel Port	—
DIO	Digital I/O box header x 1
Fan	4-pin CPU Fan connector x 1, 4-pin Chassis Fan connector x 1
Power	—
Others	Front Panel connector x 1, Chassis Intrusion x 1, Buzzer onboard x 1, CMOS jumper x 1, ATX/AT mode select x 1, ME disable x 1, eDP Tcon IC voltage select x 1, eDP panel backlight voltage select x 1, COM RI select jumper x 1, SATA PWR x 1
os
OS support	Windows® 10 64-bit, Linux Ubuntu 18.04.2

Ordering Information [MIX-H310D2]

Part Number	MIX-H310D2-A10
cpu	Socket
ram	SODIMM x 2
fan/fanless	Fan
display	HDMI x 2 eDP
storage	SATA3 x 2 M.2(M-key) x 1
lvds	—
lan	GbE x 2
usb	USB2.0 x 5, USB3.2 Gen 1 x 4
rs-232	1
rs-232/422/485	1
expansion slot	PCIe3.0[x16] x 1, M.2(E-Key) x 1
power	12V DC
tpm	—
temp	32°F ~140°F (0°C ~ 60°C)

Packing List

SATA Cable
SATA Power Cable
I/O Shield
MIX-H310D2

MIX-KLUD1

Overview

The MIX-KLUD1 from AAEON is a powerful, thin industrial embedded motherboard design for machine controller applications from CNC mills to automated robotics. The MIX-KLUD1 offers a cost competitive design with flexibility and performance, supporting the 7th Generation Intel Core Processors and up to 32 GB of memory.

Powered by Intel

The MIX-KLUD1 supports the 7th Generation Intel Core (U-series) Processors, formerly Kaby Lake, to power high performance computing

Flexible Display Options

The MIX-KLUD1 supports a variety of display options including Dual HDMI and eDP or LVDS display outputs.

Built for the Task

AAEON offers our manufacturer services to provide customization and configuration options to match your specific needs.

Features

DDR4 SODIMM x 2, Up to 32GB
Three Independent Display: VGA x 1 or HDMI x 1, eDP x 1 or LVDS x 1
Intel® LAN i211AT x 1, 219LM for iAMT 12.0 x 1
M.2 Slot (M-key) x 1
M.2 Slot (E-key) x 1
PCIe3.0 [x1] x 1
12V DC

Specifications [MIX-KLUD1]

system
processor	Intel® 7th gen. 14nm KabyLake U, FCBGA1356 Core™ i7-7600U, 2C/4C, 2.8/3.9(turbo)GHz, 4M, 300MHz/1.15GHz (Turbo) GFX,~15W TDP (Optional) Core™ i5-7300U, 2C/4C, 2.6/3.5(turbo)GHz, 3M, 300MHz/1.10GHz (Turbo)GFX, ~15W TDP(Optional) Core™ i3-7100U, 2C/4C, 2.4GHz, 3M, 300MHz/1.00GHz (Turbo) GFX, ~15W TDP Celeron® 3965U, 2C, 2.2GHz, 2M, 300MHz/900MHz (Turbo) GFX, ~15W TDP(Optional)
Chipset	—
Memory	SODIMM x 2, max. 32GB, DDR4-2133 non-ECC, un-buffered memory
I/O Chipset	NCT6793D
Ethernet	Intel® PCIe Gb L AN 219LM for vPro (i7-7600U/i5-7300U) x 1 Intel® PCIe Gb L AN 211AT x 1
Audio	Realtek® ALC887 with Amp.
TPM	NPCT650ABBYX TPM2.0 onboard (default: No)
Expansion Slot	PCIe 3.0 [x1] x 1 M.2 M key (22 x 80mm) x 1, SATA & PCIe [x4] M.2 E key (22 x 30mm) x 1 for Wireless-wifi module (PCIe+USB)
BIOS	128Mbit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/12V, Fan Monitor on CPU/Chassis
Watchdog Timer	1~255 step by software program
Smart Fan Control	CPU Fan/Chassis Fan
Wake On LAN/ PXE	Yes (WOL/PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	HDMI x 2, eDP x 1 or LVDS x 1
VGA	—
DVI	—
HDMI	HDMI 1.4 up to 4096 x 2340 @24Hz
DisplayPort	—
LVDS	Up to 1920 x 1200 @ 60 Hz, Dual Channel 18/24 bit
eDP	UP to 4096 x 2304 @ 60Hz
Backlight Control	Voltage/PWM; Max 1A
environmental & power & me
Battery	Lithium battery
Power Requirement	12V DC
Operating Temperature	32°F ~ 131°F (0°C ~ 55°C)
Storage Temperature	-40°F ~ 185°F (-40°C ~85°C)
Operating Humidity	0% ~ 90%RH, non-condensing
Certification	CE & FCC (Class A)
Form Factor	Mini-ITX: 6.7” x 6.7” (170mm x 170mm)
Weight	1.1 lb (0.5 Kg)
MTBF (hours)	400,330
Rear i/o ports
USB	USB 3.2 Gen 1 (5 Gbps) x 4
Display I/O	HMDI x 2
Audio I/O	Mic-in x 1, Line-out x 1
LAN I/O	LAN (RJ-45) port x 2
Serial Port	—
PS/2 Port	—
Others	DC Power Jack x 1
internal i/o connectors
Storage	M.2 M key (22 x 80mm) for PCIe [x4]/SATA storage x 1, SATA 6.0Gb/s x 2, 4-pin SATA power x 1
USB	USB 2.0 pin header x 2 support additional 4 USB ports
Display I/O	40-pin LVDS connector x 1, 40-pin eDP connector x 1, LCD backlight connector(inverter) x 1
Audio I/O	Speaker for 2W@4Ω x 1, AAFP follow ASUS pin out x 1
Serial Port	Boxer header x 2 for COM (COM1: RS-232/422/485 supports 5V/12V/RI)
PS/2 Port	—
Parallel Port	—
DIO	8-bit programmable (4-in/4-out) x 1
Fan	4-pin CPU Fan connector x 1, 4-pin Chassis Fan connector x 1
Power	—
Others	Front Panel connector x 1, Chassis Intrusion x 1, Buzzer onboard x 1, CMOS jumper x 1
os
OS support	Windows® 10 64-bit

Ordering Information [MIX-KLUD1]

Part Number	MIX-KLUD1-A10-7100-LV
cpu	i3-7100U
ram	SODIMM x 2
fan/ fanless	Fanless
display	HDMI x 2, LVDS
storage	SATA3 x 2, M.2 (M-key)
lvds	Dual Channel 18/24 bit
lan	GbE x 2
usb	USB 3.2 Gen 1 x 4, USB 2.0 x 4
rs-232	1
rs-232/422/485	1
expansion slot	PCIe[x1] x 1, M.2(M-key) x 1, M.2(E-Key) x 1
power	12V DC
tpm	—
temp	32°F ~ 131°F (0°C ~ 55°C)

Packing List

Heatsink/CPU Fan
SATA Cable
SATA Power Cable
I/O Shield
MIX-KLUD1

Optional Accessories

Part Number	Description
1709100201	USB 2.0 Cable (10P, 200MM, p=2.00mm, w/bracket)
1700100491	USB 2.0 Cable (2 x 5P, 490mm, p=2.00mm)
1709050201	USB 2.0 Cable (5P, 220mm, p=2.00mm)
1701100206	COM Cable (200MM, p=2.00mm)
1702150300	SATA Power Cable (4P, 300MM p=2.54mm)
1702151201	SATA Power Cable (4P, 120MM, p=2.5mm)

MIX-Q370A1

Overview

The MIX-Q370A1 mini-ITX board from AAEON offers the power of 8th Generation Intel Core Processors (Coffee Lake) on a compact form factor designed for embedded applications like smart displays, kiosks, and CNC machine controllers. With a powerful compliment of I/O features including USB 3.1 and Intel Gigabit LAN ports, the MIX-Q370A1 is the flexible solution for a wide range of embedded applications.

Features

8th/9th Gen. Intel® Core™ LGA1151 Processor
DDR4 DRAM Support, 2666MHz, Max. 32GB
M.2 Slot (M key- SATA only) x 1, M.2 Slot (E key) x 1
USB 3.2 Gen 2 Port x 4, USB 2.0 Port x 4
Intel® LAN 211AT x 3, 219LM for iAMT 12.0 x 1
SATA 6.0 Gb/s x 2
PCI-Express [x16] (Gen3) x 1
ATX Power

Specifications [MIX-Q370A1]

system
processor	8th/9th Gen. Intel® Core™ LGA 1151 socket Processor (formerly Coffee Lake-S), Max. 65W TDPs
Chipset	Intel® Q370 Express Chipset
Memory	DDR4 2666/2400/2133 MHz SODIMM x 2, Up to 32GB, Non-ECC, Un-buffered Memory, Dual channel memory architecture
I/O Chipset	NCT6793D
Ethernet	Intel® PCIe Gb LAN 219LM x 1, Intel® PCIe Gb LAN i211AT x 3
Audio	Realtek® ALC887 with Amp.
TPM	NPCT650ABBYX TPM2.0 (default: No)
Expansion Slot	PCIe3.0 [x16] x 1 M.2 E-key(22x30mm; Support CNVi)
BIOS	256Mbit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/12V, Fan Monitor on CPU/Chassis
Watchdog Timer	1~255 steps by software program
Smart Fan Control	CPU Fan/ Chassis Fan
Wake On LAN/ PXE	Yes (WOL / PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	HDMI+VGA
VGA	Up to 1920 x 1200 @ 60 Hz
DVI	—
HDMI	Up to 4096 x 2160 @30Hz(HDMI 1.4)
DisplayPort	—
LVDS	—
eDP	—
Backlight Control	—
environmental & power & me
Battery	Lithium battery
Power Requirement	ATX
Operating Temperature	32°F ~140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~185°F (-40°C ~85°C)
Operating Humidity	0%~90%RH, non-condensing
Certification	CE & FCC
Form Factor	Mini-ITX: 6.7” x 6.7” (170mm x 170mm)
Weight	1.1 lb (0.5 Kg)
MTBF (hours)	—
Rear i/o ports
USB	USB 3.2 Gen 2 (10 Gbps) x 4, USB 2.0 x 2
Display I/O	VGA x 1, HDMI x 1
Audio I/O	Mic-in x 1, Line-out x 1
LAN I/O	LAN (RJ-45) port x 4
Serial Port	—
PS/2 Port	—
Others	—
internal i/o connectors
Storage	SATA3.0 (6.0Gb/s) x 2, M.2 M-key (22 x 80mm) at bottom side x 1(SATA only)
USB	USB 2.0 (2 x 5-pin, 2.00mm) x 1 ports support additional 2 USB.
Display I/O	—
Audio I/O	AAFP x 1, Speaker x 1
Serial Port	Boxer header for COM (RS-232/422/485) x 1, Boxer header for COM (RS-232) x 1
PS/2 Port	—
Parallel Port	—
DIO	Digital I/O box header x 1
Fan	4-pin CPU Fan connector x 1, 4-pin Chassis Fan connector x 1
Power	—
Others	Front Panel connector x 1, Chassis Intrusion x 1, Buzzer onboard x 1, CMOS jumper x 1
os
OS support	Windows® 10 64-bit, Linux Ubuntu18.04. 64bit

Ordering Information [MIX-Q370A1]

Part Number	MIX-Q370A1-A10-2L	MIX-Q370A1-A10-4L
cpu	Socket	Socket
ram	SODIMM x 2	SODIMM x 2
fan/fanless	Fan	Fan
display	VGA, HDMI	VGA, HDMI
storage	SATA3 x2, M.2(M-key)	SATA3 x2, M.2(M-key)
lvds	—	—
lan	GbE x 2	GbE x 4
usb	USB 2.0 x 4 USB 3.2 Gen 2 x 4	USB 2.0 x 4 USB 3.2 Gen 2 x 4
rs-232	1	1
rs-232/422/485	1	1
expansion slot	PCIe3.0[x16] x 1, M.2(E-Key) x 1	PCIe3.0[x16] x 1, M.2(E-Key) x 1
power	ATX	ATX
tpm	—	—
temp	0~60˚C	0~60˚C

Packing List

SATA Cable
I/O Shield
MIX-Q370A1

Optional Accessories

Part Number	Description
1759200172	CPU Cooler (2-Ball, Screw with Retention Plate)
175921156B	CPU Cooler (2-Ball, Push-pin Type)
COOLER -65W-01	CPU Cooler
1709100201	USB 2.0 Cable (10P, 200mm, p=2.00mm, w/bracket)
1701100206	COM Cable (200mm, p=2.00mm)
1700100491	USB 2.0 Cable (10P, 490mm, p=2.00mm)
1709050201	USB 2.0 Cable (5P, 220mm, p=2.00mm)

MIX-Q370D1

Overview

Mini-ITX with 8th/9th Gen Intel® Core™ Processor Family, DDR4 DRAM, USB x 10, Max. 65W TDPs

Features

DDR4 SODIMM x 2, Up to 32 GB
Three Independent Display: DP x 2, eDP x 1, LVDS x 1
Intel® LAN 210AT x 1, 219LM for iAMT 12.0 x 1
M.2 Slot (M-key) x 1
M.2 Slot (E-key) x 1
USB 3.2 Gen 2 x 4, USB 2.0 x 6
PCIe [x4] x 1
Low Profile
12V DC Power Input
Support Intel® NVMe M.2 SSD

Specifications [MIX-Q370D1]

system
processor	8th/9th Generation Intel® Core™ i7/ i5 /i3, Pentium® LGA 1151 socket Processor (formerly Coffee Lake-S), Max. 65W TDPs
Chipset	Intel® Q370 Express Chipset
Memory	SODIMM x 2, Max. 32GB, DDR4 2666/2400 MHz, Non-ECC, Un-buffered Memory, Dual channel
I/O Chipset	NCT6793D
Ethernet	Intel® PHY i219LM Giga LAN (support Intel® AMT 12.0) x 1 Intel® i210AT Giga LAN x 1
Audio	Realtek® ALC887
TPM	Nuvoton TPM version 2.0
Expansion Slot	PCIe 3.0 [x4] x 1 M.2 M key (22 x 80mm) x 1 at Bottom side, SATA & PCIe [x4] M.2 E key (22 x 30mm) x 1 for Wireless-wifi module (PCIe+USB)
BIOS	256M bit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/System, Voltage Monitor on Vcore/5V/3.3V/12V, Fan Monitor on Chassis
Watchdog Timer	1~255 steps by software program
Smart Fan Control	CPU Fan/Chassis Fan
Wake On LAN/ PXE	Yes (WOL/PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	Three Independent Display
VGA	—
DVI	—
HDMI	—
DisplayPort	Up to 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz, with Digital Audio, DP++ supported
LVDS	LVDS Up to 1920 x 1200 @ 60 Hz, Dual Channel 18/24 bit (via Chrontel 7511)
eDP	eDP UP to 4096 x 2304 @ 60Hz
Backlight Control	Voltage/PWM
environmental & power & me
Battery	Lithium battery
Power Requirement	12V DC
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity	0% ~ 90% R/H, non-condensing
Certification	CE & FCC (Class A)
Form Factor	Mini-ITX: 6.7” x 6.7” (170mm x 170mm)
Weight	1.1 lb (0.5 Kg)
MTBF (hours)	256310
Rear i/o ports
USB	USB 3.2 Gen 2 (10 Gbps) x 4
Display I/O	DP x 2
Audio I/O	Mic-in x 1, Line out x 1
LAN I/O	LAN (RJ45) port x 2
Serial Port	—
PS/2 Port	—
Others	DC Jack
internal i/o connectors
Storage	SATA 6.0Gb/s x4 M.2 M key (22x80mm) x1 (Support Intel® NVMe M.2 SSD)
USB	3 x USB 2.0 pin header support additional 6 USB ports
Display I/O	40-pin LVDS connector x 1 40-pin eDP connector x 1 LCD backlight connector (inverter) x 1
Audio I/O	Speaker for 2W/4Ω x 1 AAFP follow ASUS pin out x 1
Serial Port	Boxer header x 1 for COM (COM1: RS-232/422/485 supports 5V/12V/RI)
PS/2 Port	—
Parallel Port	—
DIO	8-bit x 1 (In/Out programmable)
Fan	4-pin Chassis Fan connector x 1 4-pin CPU Fan connector x 1
Power	12V DC Power jack x 1
Others	Front panel header x 1 Clear CMOS jumper x 1 AT/ATX select jumper x 1 Chassis Intrusion x 1 4-pin SATA power x 1
os
OS support	Windows® 10 64 bit, Ubuntu 16.04 LTS

Ordering Information [MIX-Q370D1]

Part Number	MIX-Q370D1-A11
cpu	Socket
ram	SODIMM x 2
fan/fanless	Fan
display	DP x 2, LVDS,eDP
storage	SATA3 x 4, M.2(M-key)
lvds	Daul Channel 18/24 bit
lan	GbE x 2
usb	USB 2.0 x 6, USB 3.2 Gen 2 x 4
rs-232	—
rs-232/422/485	1
expansion slot	PCIe3.0[x4] x 1, M.2(M-key) x 1, M.2(E-Key) x 1
power	12V DC
tpm	—
temp	32°F ~140°F (0°C ~ 60°C)

Packing List

SATA Cable
SATA Power Cable
I/O Shield
MIX-Q370D1

Optional Accessories

Part Number	Description
1759200172	(TF)CPU Cooler Fan, LGA 1156 socket, 4P, 12V, 2-Ball Bearing, Dynatron, K785, (2U cooler)
175921156B	(TF)CPU Cooler Fan, LGA 1156 socket, 12V, 4P, 2Ball (Tray), Dreamer, DSA-00273
COOLER-65W-01	CPU Cooler, LGA 1156, 12V, 65W, 4P, Kingcooler, 0571-1463R
1709100201	USB 2.0 Cable (10P, 200MM, p=2.00mm, w/bracket)
1700100491	USB 2.0 Cable (2 x 5P, 490mm, p=2.00mm)
1709050201	USB 2.0 Cable (5P, 220mm, p=2.00mm)
1701100206	COM Cable (200MM, p=2.00mm)
1702150300	SATA Power Cable (4P, 300MM p=2.54mm)

MIX-Q370D2

Overview

The MIX-Q370D2 from AAEON combines the power of the 8th and 9th Generation Intel® Core™ processors (formerly Coffee Lake, Coffee Lake Refresh) with a full I/O suite on the flexible Mini-ITX form factor. The MIX-Q370D2 provides users with six USB 3.2 Gen 2 ports, six USB 2.0 ports, and display output from HDMI, VGA and eDP. It also offers M.2 with NVMe to support the fastest storage options available. The MIX-Q370D2 is designed with the features needed to power any industrial computing application.

8th/9th Generation Intel® Core™ MIX-Q370D2 supports the 8th/9th Gen Intel® Core™ i3/i5/i7 processors (formerly Coffee Lake, Coffee Lake Refresh), offering top end CPU performance for any task.

Faster Computing MIX-Q370D2 supports up to 64 GB of DDR4 SODIMM memory to help unlock your processor’s performance. Along with M.2 M-Key (2280/2242) slot with support for NVMe and SATA storage, the MIX-Q370D2 won’t slow down your vital applications.

Full Featured I/O MIX-Q370D2 provides a full suite of I/O ports including six USB 3.2 Gen 2 ports, four USB 2.0, and two Gigabit Ethernet LAN ports. Display support includes two HDMI, one VGA port and eDP.

PCI Express MIX-Q370D2 includes PCIe 3.0 [x16] expansion slot to support VGA graphics cards to power performance demanding AI and edge computing applications. The board also offers an M.2 E-Key (2230) slot for further expansion.

Industrial Applications The MIX-Q370D2 is already proving itself in the real world, powering industrial AI applications including visual inspection of battery production lines, helping to increase safety and accuracy of manufacturing facilities.

Features

8th/9th Gen. Intel® Core™ LGA1151 Processor
DDR4 DRAM Support, 2666MHz, Max. 64GB
M.2 Slot (M key; NVME/SATA) x 1, M.2 Slot (E key) x 1
USB 3.2 Gen 2 Port x 6, USB 2.0 Port x 6
Intel® Gigabit Ethernet x 2
SATA 6.0 Gb/s x 2
PCI-Express [x16] (Gen3) x 1
12VDC input

Specifications [MIX-Q370D2]

system
processor	8th/9th Gen. Intel® Core™ LGA 1151 socket Processor (formerly Coffee Lake-S), Max. 65W TDPs
Chipset	Intel® Q370 Express Chipset
Memory	DDR4 2666/2400/2133 MHz SODIMM x 2, Up to 64GB, Non-ECC, Un-buffered Memory, Dual channel memory architecture
I/O Chipset	NCT6793D
Ethernet	Intel® GbE LAN i219V x 1, Intel® GbE LAN i211AT x 1
Audio	Realtek® ALC887
TPM	NPCT750AAAYX TPM2.0
Expansion Slot	PCIe3.0 [x16] x 1 M.2 E-key(22 x 30 mm) x1 for Wireless-wifi module ( PCIe+USB; CNVi)
BIOS	256Mbit Flash ROM, AMI BIOS
H/W Monitor	Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/12V, Fan Monitor on CPU/Chassis
Watchdog Timer	1~255 steps by software program
Smart Fan Control	CPU Fan/Chassis Fan
Wake On LAN/ PXE	Yes (WOL/PXE)
Power State	S3, S4, S5
graphics
Graphics Chipset	Intel® UHD Graphics
Graphics Multi Display	HDMI x 2 + VGA + eDP
VGA	Up to 1920 x 1200 @ 60 Hz
DVI	—
HDMI	Up to 3840 x 2160 @30 Hz(HDMI 1.4b)
DisplayPort	—
LVDS	—
eDP	eDP UP to 4096 x 2304 @ 60Hz
Backlight Control	Support eDP
environmental & power & me
Battery	Lithium battery
Power Requirement	12V DC
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity	0% ~ 90% R/H, non-condensing
Certification	CE & FCC
Form Factor	Mini-ITX: 6.7″ x 6.7″ (170 mm x 170 mm)
Weight	1.1 lb (0.5 Kg)
MTBF (hours)	319,160
Rear i/o ports
USB	USB 3.2 Gen2 x 6, USB2.0 x 4
Display I/O	VGA x 1, HDMI x 2
Audio I/O	Mic-in x 1, Line-out x 1
LAN I/O	LAN (RJ-45) port x 2
Serial Port	—
PS/2 Port	—
Others	12V DC Jack (max:192W)
internal i/o connectors
Storage	SATA3.0 (6.0Gb/s) x 2 M.2 M-key (22 x 42/80mm; NVME/SATA) x 1
USB	USB 2.0 (2 x 5-pin, 2.00mm) x 1 port support additional 2 USB
Display I/O	eDP x 1
Audio I/O	AAFP x 1
Serial Port	Boxer header for COM (RS-232) x 1; RS-232/422/485 x 1
PS/2 Port	—
Parallel Port	—
DIO	Digital I/O box header x 1
Fan	4-pin CPU Fan connector x 1, 4-pin Chassis Fan connector x 1
Power	12V ATX Power Connector x 1
Others	Front Panel connector x 1 Chassis Intrusion x 1 Buzzer onboard x 1 CMOS jumper x 1 SATA Power connector x 1 SPI ROM programming header x 1 ATX/AT mode jumper x 1 eDP backlight power jumper x 1 eDP T-con IC power jumper x 1
os
OS support	Windows® 10 64-bit, Linux Ubuntu 18.04.2

Ordering Information [MIX-Q370D2]

Part Number	MIX-Q370D2-A10
cpu	Socket
ram	SODIMM x 2
fan/fanless	Fan
display	VGA, HDMI x 2, eDP
storage	SATA3 x2 M.2(M-key) x 1
lvds	—
lan	GbE x 2
usb	USB2.0 x 6 USB3.2 Gen 2 x 6
rs-232	1
rs-232/422/485	1
expansion slot	PCIe3.0[x16] x 1 M.2(E-Key) x 1
power	12V DC
tpm	2.0
temp	32°F ~140°F (0°C ~ 60°C)

Packing List

SATA Cable
SATA Power Cable
I/O Shield
MIX-Q370D2

Optional Accessories

1759200172	CPU Cooler (2-Ball, Screw with Retention Plate)
175921156B	CPU Cooler (2-Ball, Push-pin Type)
COOLER-65W-01	CPU Cooler, LGA 1156, 12V, 65W, 4P, Kingcooler, 0571-1463R
1709100201	USB 2.0 Cable (10P, 200MM, p=2.00mm, w/bracket)
1701100206	COM Cable (200MM, p=2.00mm)
1700100491	USB 2.0 Cable (10P, 490mm, p=2.00mm)
1255X00011	(TF)AC/DC Adapter.12V.192W.16A.FSP192-AHAN3.9NA1920100

NANOCOM-APL

Overview

The NanoCOM-APL is built around a 6th Generation Intel® Atom™, Celeron®, or Pentium® processor and features onboard LPDDR4 memory with a capacity of up to 8GB. The 7W module’s low power-consumption architecture means it can be used at the heart of hand-held, battery-powered devices and fully enclosed IP67 applications.

Combined with an FPGA controller and an AI chip, the NanoCOM-APL is being used as the centerpiece of advanced machine vision systems that scan products to create 3D images that can be checked for faults. Because of its size and industrial operating temperature range, these systems can be used on a production line or even on a robotic arm.

The module also features 1GbE LAN connections, optional onboard eMMC storage of up to 64Gb, a PCIe x4 expansion slot, an LVDS, DDI, or eDP connections, and support for up to eight USB3.0 and two USB2.0 ports.

Features

Intel® Atom™/Celeron®/Pentium® SoC
Onboard Memory LPDDR4 4GB/8GB
Intel I210/I211
Support eDP/LVDS, DDI D
SATA x2, eMMC 5.x (optional, up to 64GB)
USB 2.0 x 8 + USB 3.2 Gen 1 x 2
2-wire UART, Tx/Rx x2
PCI-Express [x1] x4, 3 device available at any time.
DC Input Range, 12V
COM Express Mini Size, Pin-Out Type 10

Specifications [NANOCOM-APL]

system
Form Factor	COM Express, Mini size, Pin-out Type 10
CPU	Onboard 6th Generation Intel® Atom™/Celeron®/Pentium® SoC
CPU Frequency	E39xx series, N4xxx series
Chipset	Intel® Atom™/Celeron® Processor SoC
Memory Type	Onboard LPDDR4
Max. Memory Capacity	8GB LPDDR4 Onboard
BIOS	SPI type
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	Standard : +12V, AT/ATX (Optional: +5V, AT/ATX)
Power Supply Type	AT/ATX
Power Consumption (Typical)	Up to E3950 TDP 12W CPU
Dimension (L x W)	3.31″ x 2.17″ (84mm x 55mm)
Operating Temperature	32 °F ~ 140 °F (0 °C ~ 60 °C) -40 °F ~ 185 °F (-40 °C ~ 80 °C)
Storage Temperature	-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80,000
Certification	CE/FCC
display
Display Controller	Intel® HD Graphic
Video Output	LVDS LCD/eDP, DDI x 1
LVDS Interface	Supports 18-bit and 24-bit Single channel
i/o
Ethernet	Intel® I210IT
Audio	High Definition Audio Interface
USB Support	USB 2.0 x 8, USB 3.2 Gen 1 x 2
Serial Port	TX/RX x 2
HDD Interface	SATA 3 x 2
Onboard Storage	Optional onboard eMMC
Expansion Slot	PCIe [x1] x 4 (up to 3 devices) LPC SMBus I2C
GPIO	GPIO 8-bit
TPM	—

Ordering Information [NANOCOM-APL]

Part Number	NANOCOM-APL-A11-0001	NANOCOM-APL-A11-0002	NANOCOM-APL-A11-0003
com express type	Type 10 (COM.0 Rev3.0)	Type 10 (COM.0 Rev3.0)	Type 10 (COM.0 Rev3.0)
cpu	N4200	N3350	E3950
memory	4GB DDR4	4GB DDR4	8GB DDR4
display	LVDS, DDIx1	LVDS, DDIx1	LVDS, DDIx1
lvds	18/24 bit 1-channel (Optional : eDP)	18/24 bit 1-channel (Optional : eDP)	18/24 bit 1-channel (Optional : eDP)
storage	SATA x2 32GB eMMC	SATA x2 32GB eMMC	SATA x2 64GB eMMC
lan	GbE x 1	GbE x 1	GbE x 1
usb	USB 3.2 Gen 1 x 2 USB 2.0 x 8	USB 3.2 Gen 1 x 2 USB 2.0 x 8	USB 3.2 Gen 1 x 2 USB 2.0 x 8
uart	2 (TX/RX)	2 (TX/RX)	2 (TX/RX)
expansion slot	PCI-E[x1] x4	PCI-E[x1] x4	PCI-E[x1] x4
power	12V	12V	12V
temp	0°C~60°C	0°C~60°C	0°C~60°C
others	I2C, SMBus,8b-GPIO/(SDIO)	I2C, SMBus,8b-GPIO/(SDIO)	I2C, SMBus,8b-GPIO/(SDIO)

Packing List

NanoCOM-APL

Optional Accessories

NanoCOM-APL-E-HSP01	Heat Spreader 84 x 55 x 11 mm, Black, NanoCOM-APL For E39xx CPU only
NanoCOM-APL-N-HSP01	Heat Spreader 84 x 55 x 11 mm, Black, NanoCOM-APL For Nxxx CPU only
NanoCOM-FAN01	CPU Cooler, for NanoCOM, to be used with Heat Spreader
ECB-920A-A10-0001	COM Type 1/6/10, Carrier Board, ATX, GbE, 8USB, 2COM, 4SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0

NanoCOM-BT

Overview

The NanoCOM-BT is a cutting-edge product that provides high performance and low power consumption in the embedded market.

NanoCOM-BT adopts the latest Intel® Atom™ N2000/E3800 processor. The system memory deploys with onboard DDR3L 2 GB memory. In addition, Intel® I211/i210 supports 10/100/1000Base-TX that allows faster network connections. This model applies three PCI-Express〔x1〕, one LPC bus, and one SMBus. Moreover, two SATA 3.0Gb/s are configured on the NanoCOM-BT. NanoCOM-BT also equips six USB2.0 and one USB2.0/3.0 bus for flexible I/O expansions.

The display of NanoCOM-BT supports CRT/LCD simultaneous/ dual view display. This brand new COM Express Module is developed to cater to the requirements of Automation, Medical, ticket machine, transportation, gaming, KIOSK, and POS/POI applications.

Applications

Automation
Medical
Ticket Machine
Transportation
Gaming
KIOSK
POS/POI

Features

Intel® Atom™ E3800/ Celeron® N2000 Series Processor SoC
Onboard DDR3L 2 GB Memory (Optional to 4 GB)
Gigabit Ethernet x 1
18/24-bit Single Channel LVDS LCDs, DDI x 1
High Definition Audio Interface
SATA x 2, eMMC (Optional)
USB 2.0 x 6 + USB 2.0/USB 3.2 Gen 1 x 1, GPIO 8-bit, PCI-Express [x1] x 3
COM Express Pin-out Type 10
Mini Size, 84mm x 55mm, COM.0 Rev. 2.1

Specifications [NANOCOM-BT]

system
Form Factor	COM Express Mini size, Type 10
CPU	Intel® Atom™/ Celeron® Processor SoC (M/I)
CPU Frequency	Up to E3845, 1.91 GHz
Chipset	Intel® Atom™/ Celeron® Processor SoC
Memory Type	Non-ECC DDR3L-1333
Max. Memory Capacity	2 GB DDR3L Onboard (up to 4 GB)
BIOS	AMI BIOS, Legacy free
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	Standard : +12V, AT/ATX, Optional: +5V, AT/ATX
Power Supply Type	AT/ATX
Power Consumption (Typical)	0.7A@12V, full load, E3845
Dimension (L x W)	3.31” x 2.17” (84 mm x 55 mm)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C) -40°F ~ 185°F (-40°C ~ 85°C) by E3800, 2GB SKU
Storage Temperature	-40°F ~ 185°F (-40°C ~ 85°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	90,000
Certification	CE/FCC Class A
display
Display Controller	Intel® HD Graphic
Video Output	LVDS LCD/eDP, DDI x 1
LVDS Interface	Supports 18-bit and 24-bit Single channel
i/o
Ethernet	Intel® I210IT
Audio	High Definition Audio Interface
USB Support	USB 2.0 x 7, USB 3.2 Gen 1 x 1
Serial Port	Tx/Rx x 2
HDD Interface	SATA 2 x 2
Onboard Storage	Optional for 8GB/16GB eMMC
Expansion Slot	PCIe [x1] x 3 (up to 3 devices) LPC SMBus I2C
GPIO	GPIO 8-bit
TPM	—

Ordering Information [NANOCOM-BT]

Part Number	NANOCOM-BT-A10-0001	NANOCOM-BT-A10-0002	NANOCOM-BT-A10-0003	NANOCOM-BT-A10-0006	NANOCOM-BTW2-A10-0003
com express type	10 (COM.0 Rev. 2.1)	10 (COM.0 Rev. 2.1)	10 (COM.0 Rev. 2.1)	10 (COM.0 Rev. 2.1)	10 (COM.0 Rev. 2.1)
cpu	N2930, 4C/1.83 GHz	N2807, 2C/1.58 GHz	E3845, 4C/1.91 GHz	E3825, 2C/1.33 GHz	E3845, 4C/1.91 GHz
memory	2GB DDR3L	2GB DDR3L	2GB DDR3L	2GB DDR3L	2GB DDR3L
display	LVDS/eDP, DDI	LVDS/eDP, DDI	LVDS/eDP, DDI	LVDS/eDP, DDI	LVDS/eDP, DDI
lvds	18/24bit,1CH	18/24bit,1CH	18/24bit,1CH	18/24bit,1CH	18/24bit,1CH
storage	SATA x 2	SATA x 2	SATA x 2 16GB eMMC	SATA x 2 8GB eMMC	SATA x 2 16GB eMMC
lan	GbE x 1	GbE x 1	GbE x 1	GbE x 1	GbE x 1
usb	USB 3.2 Gen 1 x 1, USB 2.0 x 7	USB 3.2 Gen 1 x 1, USB 2.0 x 7	USB 3.2 Gen 1 x 1, USB 2.0 x 7	USB 3.2 Gen 1 x 1, USB 2.0 x 7	USB 3.2 Gen 1 x 1, USB 2.0 x 7
uart	2 (Tx/Rx)	2 (Tx/Rx)	2 (Tx/Rx)	2 (Tx/Rx)	2 (Tx/Rx)
expansion slot	PCIe [x1] x 3	PCIe [x1] x 3	PCIe [x1] x 3	PCIe [x1] x 3	PCIe [x1] x 3
power	+12V (ATX)	+12V (ATX)	+12V (ATX)	+12V (ATX)	+12V (ATX)
power temp	0°C ~ 60°C	0°C ~ 60°C	0°C ~ 60°C	0°C ~ 60°C	-40°C ~ 85°C
others	LPC, GPIO 8Bit, HDA, I2C, SMBus	LPC, GPIO 8Bit, HDA, I2C, SMBus	LPC, GPIO 8Bit, HDA, I2C, SMBus	LPC, GPIO 8Bit, HDA, I2C, SMBus	LPC, GPIO 8Bit, HDA, I2C, SMBus

Packing List

M2.5 Screw x 4
NanoCOM-BT

Optional Accessories

ECB-920A-A10-0001	COM Type 1/6/10 Carrier Board, ATX, GbE, 8 USB, 2 COM, 4 SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0
PER-A134	Heat Spreader, for NanoCOM-BT, Onboard CPU
NanoCOM-FAN01	CPU Cooler, 84 x 55x 22.2 mm, used with HSP
PER-A123	Passive Heatsink, for NanoCOM size, to be used with Heat Spreader

NanoCOM-KBU

Overview

AAEON’s NanoCOM-KBU is the only COM Express Type 10 module on the market to be powered by a 7th Gen Intel® Core™ i7 Processor. The business card-size board is highly extendable as it supports a 1GbE LAN port, eight USB2.0 and two USB3.0 ports, two SATA 2 interfaces, and four PCI-E expansion slots. As it can also be used in -40°C to 85°C temperatures, this module is as versatile as it is powerful.

By fitting the NanoCOM-KBU with an Intel Core processor, AAEON has not only demonstrated its unmatched technical expertise; it’s also made it possible to have onboard 4GB DDR4 memory and the advanced Intel® HD Graphics 620 engine on a COM Express Type 10 board. As a result, customers will be able to enjoy accelerated processing speeds and 4K resolution.

The NanoCOM-KBU’s embedded controller structure features a real-time interrupt and also power and battery management systems. Additionally, because the board’s I2C bus is compatible with a range of IC formats, integrating it with your own custom-made carrier board is a straightforward operation.

To simplify the implementation process, AAEON provides customers with dedicated development engineers. To make sure everything continues to work properly, there are also local engineers for debugging issues and the AAEON Hi-Safe program for up-to-the-minute system information.

Features

7th Generation Intel® Core™ ULT Series Processor
Onboard 4GB DDR4 2133 Memory
Gigabit Ethernet x 1
18/24-bit Single-Channel LVDS LCDs/eDP, DDI x 1
High Definition Audio Interface
SATA x 2
USB 3.0 x 2, USB 2.0 x 8
PCI-Express〔x1〕x 4
GPIO x 8, SMbus, I2C, LPC
COM Express Type 10
Mini Size, 84mm x 55mm
Supports Industrial Grade Temperature

Specifications [NANOCOM-KBU]

system
Form Factor	COM Express Mini size, Type 10
CPU	7th generation Intel® Core™ ULT Series Processor
CPU Frequency	up to i7-7600U 2c/4t, 2.8GHz
Chipset	Intel® Core™/Celeron® Processor SoC
Memory Type	Non-EEC DDR4-2133
Max. Memory Capacity	4GB DDR4 Onboard
BIOS	AMI BIOS, Legacy free
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	Normal: +12V
Power Supply Type	AT/ATX
Power Consumption (Typical)	i7-7600U 12V@1.83A. Under 100% loading
Dimension (L x W)	3.31” x 2.17” (84mm x 55mm)
Operating Temperature	32 °F ~ 140 °F (0 °C ~ 60 °C) -40 °F ~ 185 °F (-40 °C ~ 85 °C) Option for NANOCOM-SKU series
Storage Temperature	-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80000
Certification	CE/FCC Class A
display
VGA/LCD Controller	Onboard 7th Gen. intel® Core™ U-Series Processor, HD610/620
Video Output	LVDS LCD/eDP, DDI x 1
i/o
Ethernet	Intel® I219 GbE
Audio	High Definition Audio Interface
USB Port	USB 2.0 x 8, USB 3.0 x 2
Serial Port	TX/RX x 2
HDD Interface	SATAIII x 2
Expansion Slot	PCIe x1 supports 4 devices LPC Bus Smbus I2C
GPIO	8-bit
Onboard Storage	—
TPM	fTPM Supported

Ordering Information [NANOCOM-KBU]

Part Number	NANOCOM-KBU-A10-0001
com express type	10 (COM.0 Rev 3.0)
cpu	7th Gen. Intel® Core™ i7-7600U 2c/2.8GHz
memory	4GB DDR4
display	LVDS/(eDP), DDI x1
lvds	18/24b 1CH (LVDS share with eDP)
storage	SATAIII x 2
lan	GbE x1
usb	USB 3.0 x2 USB 2.0 x8
uart	2 (Tx/Rx)
expansion slot	PCI-E[x1] x4
power	12V
temp	0°C~60°C
others	I2C, GPIO, SMBus

Packing List

Screws
NanoCOM-KBU

Optional Accessories

ECB-920A-A10-0001	COM Type 1/6/10 Carrier Board, ATX, GbE, 8 USB, 2 COM, 4 SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0
NanoCOM-SKU-HSP01	Heat Spreader, 84 x 55 x 11 mm, Black, NanoCOM-SKU
NanoCOM-FAN01	CPU Cooler, 84 x 55 x 22.2 mm, Silver use w/ HSP

CPU Support Chart

CPU Kabylake	Base Frequency/Turbo Boost GHz	Core/Thread	Graphic
i7-7600U	2.8/3.9	2/4	i7-7600U / HD620
i5-7300U	2.6/3.5	2/4	i5-7300U / HD620
i3-7100U	2.4	2/4	i3-7100U / HD620
C-3965U	2.2	2/4	C3965U / HD610

NANOCOM-KBU-A20

Overview

COM Express Type 10 with 7th Generation Intel® Core™ ULT Series Processor

Features

7th Generation Intel® Core™ ULT Series Processor
Onboard 8GB DDR4 2666 Memory
Onboard 64 GB eMMC Support
Gigabit Ethernet x 1
18/24-bit Single-Channel LVDS LCDs/eDP, DDI x 1
High Definition Audio Interface
SATA x 2
USB 3.2 Gen 1 x 2, USB 2.0 x 8
PCI-Express [x1] x 4
GPIO x 8, SMbus, I2C, LPC
COM Express Type 10
Mini Size, 84mm x 55mm
Supports Industrial Grade Temperature

Specifications [NANOCOM-KBU-A20]

system
Form Factor	COM Express Mini size, Type 10
CPU	7th generation Intel® Core™ ULT Series Processor
CPU Frequency	Up to i7-7600U, 2c/4t, 2.8GHz
Chipset	Intel® Core™/Celeron® Processor SoC
Memory Type	Non-ECC DDR4-2133
Max. Memory Capacity	8GB DDR4 onboard
BIOS	AMI BIOS, Legacy free
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	Standard: +12V
Power Supply Type	AT/ATX
Power Consumption (Typical)	i7-7600U+8GB 12V@1.83A, i3-7100U 12V@1.42A. Under 100% loading. CPU Set to 15W TDP. CPU based frequency may change accordingly.
Dimension (L x W)	3.31” x 2.17” (84mm x 55mm)
Operating Temperature	32 °F ~ 140 °F (0 °C ~ 60 °C) -40 °F ~ 185 °F (-40 °C ~ 80 °C) Option for NANOCOM-SKU series
Storage Temperature	-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80000
Certification	CE/FCC Class A
display
VGA/LCD Controller	Onboard 7th Gen. Intel® Core™ U-Series Processor, GT2-520/510
Video Output	LVDS LCD/eDP, DDI x 1
i/o
Ethernet	Intel® I219 GbE
Audio	High Definition Audio Interface
USB Port	USB 2.0 x 8, USB 3.2 Gen 1 x 2
Serial Port	TX/RX x 2
HDD Interface	SATA 3 x 2
Expansion Slot	PCIe [x1] x 4 (up to 4 devices) LPC SMBus I2C
GPIO	8-bit
Onboard Storage	eMMC optional
TPM	fTPM Supported

Ordering Information [NANOCOM-KBU-A20]

Part Number	NANOCOM-KBU-A20-0001
com express type	10 (COM.0 Rev 3.0)
cpu	7th Gen. Intel® Core™ i7-7600U 2.8 GHz
memory	8GB DDR4
display	LVDS (Option : eDP), DDI x 1
lvds	18/24b 1CH (LVDS share with eDP)
storage	SATA3 x 2 eMMC 64GB
lan	GbE x 1
usb	USB 3.2 Gen 1 x 2 USB 2.0 x 8
uart	2-wire (Tx/ Rx) x 2
expansion slot	PCIe [x1] x 4
power	+12V
temp	0°C~60°C
others	LPC, GPIO 8 bit, I2C, SMBus

Packing List

NanoCOM-KBU-A20

Optional Accessories

ECB-920A-A10-0001	COM Type 1/6/10 Carrier Board, ATX, GbE, 8 USB, 2 COM, 4 SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0
NanoCOM-SKU-HSP01	Heat Spreader, 84 x 55 x 11 mm, Black, NanoCOM-SKU
NanoCOM-FAN01	CPU Cooler, 84 x 55 x 22.2 mm, Silver use w/ HSP
NanoCOM-KBU-FAN01	CPU Cooler, 84 x 55 x 18 mm, Black, NanoCOM-KBU

CPU Supports Chart

CPU Kabylake	Base Frequency/Turbo Boost GHz	Core/Thread	Graphic
i7-7600U	2.8/3.9	2/4	i7-7600U / HD620
i5-7300U	2.6/3.5	2/4	i5-7300U / HD620
i3-7100U	2.4	2/4	i3-7100U / HD620
C-3965U	2.2	2/4	C3965U / HD610

*6xxxU SoC supported as option

NanoCOM-SKU

Overview

COM Express Type 10 Module with the 6th Gen Intel® Core™ Series CPUs.

Traditionally powered by SoCs instead of a full-fledged processor due to the limited area, which measures 84 x 55 mm (equivalent to a business card), the NanoCOM-SKU, the latest entry to the company’s NanoCOM product line, greatly improves on that with an Intel® Core™ i7-6600U CPU, along with a maximum of 4 GB of onboard DDR4 memory while drawing about 18W of power in full loading, a string of feats still unheard of in the embedded community. SKUs with other Core processors and RAM are also available.

With an exceptional level of performance but still retaining the compactness of the form factor, the module is slated to eliminate the bottlenecks and inadequacies commonly found in Atom™ or other equivalent SoC-powered modules when applied on more performance-demanding applications, which include graphics-intensive medical equipment or digital signage, and high-loading robotics and automation controllers used in industrial automation, bringing not only the best in any situation, but also opening new realm for more possibilities.

Features

6th Generation Intel® Core™ ULT Series Processor
Onboard 4GB DDR4 2133 Memory
Gigabit Ethernet x 1
18/24-bit Single-Channel LVDS LCDs/eDP, DDI x 1
High Definition Audio Interface
SATA x 2
USB 3.2 Gen 1 x 2, USB2.0 x 8
PCI-Express [x1] x 4
GPIO x 8, SMbus, I2C, LPC
COM Express Type 10
Mini Size, 84mm x 55mm
Supports Industrial Grade Temperature

Specifications [NANOCOM-SKU]

system
Form Factor	COM Express Mini size, Type 10
CPU	6th generation Intel® Core™ ULT Series Processor up to i7-7600U
CPU Frequency	—
Chipset	Intel® SoC
Memory Type	—
Max. Memory Capacity	—
BIOS	AMI BIOS, Legacy free BIOS
Wake on LAN	Yes
Watchdog Timer	ITE IT8528VG
Power Requirement	Standard: +12V
Power Supply Type	—
Power Consumption (Typical)	i7-6600U 12V@1.5A, i3-6100U 12V@1.42A. Under 100% loading. CPU Set to 15W TDP. CPU base frequency may change accordingly.
Dimension (L x W)	3.31″ x 2.17″ (84mm x 55mm)
Operating Temperature	32°F~ 140°F (0°C ~ 60°C) -40°F~ 185°F (-40°C ~ 85°C)
Storage Temperature	-4°F ~ 158°F (-20°C ~ 70°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80,000
Certification	—
display
Display Controller	Onboard 6th Gen. intel® Core™ U-Series Processor, HD510/520
Video Output	LVDS/eDP, DDI x 1
LVDS Interface	Supports 18-bit and 24-bit Single channel
i/o
Ethernet	Intel® I219 GbE
Audio	HD Audio x 1
USB Support	USB 3.2 Gen 1 x 2, USB 2.0 x 8
Serial Port	2-wire UART x 2 ( TX/RX)
HDD Interface	SATAIII x 2
Onboard Storage	—
Expansion Slot	PCIe[x1] x4 (up to 4 devices) LPC SMBus I2C
GPIO	8-bit
TPM	fTPM optional

Ordering Information [NANOCOM-SKU]

Part Number	NANOCOM-SKU-A10-0001	NANOCOM-SKU-A10-0003	NANOCOM-SKUW2-A10-0001
com express type	10 (COM.0 Rev 2.1)	10 (COM.0 Rev 2.1)	10 (COM.0 Rev 2.1)
cpu	6th Gen. Intel® Core™ I7-6600U 2c/2.6GHz	6th Gen. Intel® Core™ I3-6100U 2c/2.3GHz	6th Gen. Intel® Core™ I7-6600U 2c/2.6GHz
memory	4GB DDR4	4GB DDR4	4GB DDR4
display	LVDS (Option : eDP), DDI x 1	LVDS (Option : eDP), DDI x 1	LVDS (Option : eDP), DDI x 1
lvds	18/24b 1CH (LVDS shared with eDP)	18/24b 1CH (LVDS shared with eDP)	18/24b 1CH (LVDS shared with eDP)
storage	SATA3 x 2	SATA3 x 2	SATA3 x 2
lan	GbE x1	GbE x1	GbE x1
usb	USB 3.2 Gen 1 x2 USB2.0 x8	USB 3.2 Gen 1 x2 USB2.0 x8	USB 3.2 Gen 1 x2 USB2.0 x8
uart	2 (Tx/Rx)	2 (Tx/Rx)	2 (Tx/Rx)
expansion slot	PCI-E[x1] x4	PCI-E[x1] x4	PCI-E[x1] x4
power	12V	12V	12V
power temp	0°C~60°C	0°C~60°C	-45°C~85°C
others	I2C, SMBus, 8b-GPIO/(SDIO)	I2C, SMBus, 8b-GPIO/(SDIO)	I2C, SMBus, 8b-GPIO/(SDIO)

Packing List

NanoCOM-SKU

Optional Accessories

ECB-920A-A10-0001	COM Type 1/6/10 Carrier Board, ATX, GbE, 8 USB, 2 COM, 4 SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0
NanoCOM-SKU-HSP01	Heat Spreader, 84 x 55 x 11 mm, Black, NanoCOM-SKU
NanoCOM-FAN01	CPU Cooler, 84 x 55 x 22.2 mm, Silver use w/ HSP

NANOCOM-WHU

Overview

COM Express Type 10 with 8th Generation Intel® Core™ ULT Series Processor

Features

8th Generation Intel® Core™/Celeron™ ULT Processor
Onboard DDR4 memory, up to 8GB
Gigabit Ethernet x 1
eDP, DDI x 1
High Definition Audio Interface
SATA3 x 2, eMMC onboard (up to 64GB)
USB 3.2 x 2, USB 2.0 x 8
PCI-Express [x1] x 4
GPIO x8, SMbus, I2C, LPC
COM Express Type 10, Mini size, 84mm x 55mm

Specifications [NANOCOM-WHU]

system
Form Factor	COM Express Mini size 84mm x 55mm
CPU	8th Generation Intel® Core™ ULT Series Processor
CPU Frequency	—
Chipset	Onboard 8th Generation Intel® Core™ SoC
Memory Type	Onboard DDR4-2400/2133, non ECC support.
Max. Memory Capacity	Up to 8GB
BIOS	AMI BIOS, Legacy free BIOS
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	Standard: +12V
Power Supply Type	AT Mode
Power Consumption (Typical)	TBD
Dimension (L x W)	3.31” x 2.17” (84 mm x 55 mm)
Operating Temperature	32°F~ 140°F (0°C ~ 60°C)
Storage Temperature	-4°F ~ 158°F (-20°C ~ 70°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	717,282
Certification	CE/FCC Class A
display
VGA/LCD Controller	Intel® UHD Graphics 620 / 610
Video Output	eDP, DDI x1
i/o
Ethernet	Intel® I219 GbE x 1
Audio	HD Audio x 1
USB Port	USB 2.0 x 8 USB 3.2 x 2
Serial Port	2-wire UART x 2 (TX/RX)
HDD Interface	SATA3 x 2
Expansion Slot	PCIe [x1] x4 I2C, LPC, SMBus
GPIO	8 bit
Onboard Storage	eMMC
TPM	fTPM

Ordering Information [NANOCOM-WHU]

Part Number	NANOCOM-WHU-A10-0002	NANOCOM-WHU-A10-0003	NANOCOM-WHU-A10-0004
com express type	Type 10	Type 10	Type 10
cpu	i5-8365UE	i3-8145UE	Celeron 4305UE
memory	Onboard DDR4 8GB	Onboard DDR4 8GB	Onboard DDR4 4GB
display	eDP, DDI x 1	eDP, DDI x 1	eDP, DDI x 1
lvds	—	—	—
storage	SATA3 x 2 eMMC 64GB	SATA3 x 2 eMMC 64GB	SATA3 x 2 eMMC 32 GB
lan	GbE x 1	GbE x 1	GbE x 1
usb	USB 2.0 x 8 USB 3.2 x 2	USB 2.0 x 8 USB 3.2 x 2	USB 2.0 x 8 USB 3.2 x 2
uart	2-Wire (Tx/Rx) x 2	2-Wire (Tx/Rx) x 2	2-Wire (Tx/Rx) x 2
expansion slot	PCIe [x1] x 4, I2C x 1, LPC x 1, SMBUS x 1	PCIe [x1] x 4, I2C x 1, LPC x 1, SMBUS x 1	PCIe [x1] x 4, I2C x 1, LPC x 1, SMBUS x 1
power	+12V	+12V	+12V
power temp	0°C ~ 60°C	0°C ~ 60°C	0°C ~ 60°C
others	—	—	—

Packing List

NANOCOM-WHU

Optional Accessories

ECB-920A-A10-0001	COM Type 1/6/10 Carrier Board, ATX, GbE, 8 USB, 2 COM, 4 SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0
NanoCOM-WHU-HSP01	Heat Spreader, 84 x 55 x 11 mm, Black, NanoCOM-WHU
NanoCOM-WHU-FAN01	CPU Cooler, 84 x 55 x 18 mm, Black, NanoCOM-WHU
NanoCOM-FAN02	CPU cooler, 845322.2mm.Sliver.use w/HSP

CPU Support Chart

CPU	Base Frequency	Max Turbo Frequency	Core/Thread	Graphic
i5-8365UE	1.60 GHz	4.10 GHz	4c / 8t	Intel® UHD Graphics 620
i3-8145UE	2.20 GHz	3.90 GHz	2c / 4t	Intel® UHD Graphics 620
Celeron 4305UE	2.00 GHz	2.00 GHz	2c / 2t	Intel® UHD Graphics 610

PCM-CFS

Compact Board with 8th/9th Generation Intel® Core i7/i5/i3 and Celeron® Processor (socket type)

Features

8th/ 9th Gen Intel® Core i7/i5/i3/ Celeron Socket Type CPU (Up to 65W)
DDR4 SODIMM Slot x 2, up to 32GB
Dual LVDS, VGA x 1, DVI x 1
PCIe[x16] Expansion Slot x 1
GbE x 2, HDA x 1 (Line-in, line-out, speaker out)
Half size mPCIe x 1 (With Nano-SIM), M.2 B key 2280 Slot x 1, M.2 M key 2280 Slot x 1
SATA 6.0 Gb/s x 3, USB 3.2 Gen 2 x 4, USB2.0 x 4, Touch x 1 (4/5/8 Wire)
TPM2.0 x 1, RS232 x 8, RS232/422/485 x 2
CPU/System FAN connector x 2, DIO 16 bit
ATX Power Design

Specifications [PCM-CFS]

system
Form Factor	5.25” Compact Board
CPU	8th/9th Generation Intel® Core i7/i5/i3/Celeron® Socket Type (Up to 65W)
CPU Frequency	Up to 5.0GHz
Chipset	Intel® Q370 (TDP: 6W)
Memory Type	SODIMM DDR4 Memory Slot x 2
Max. Memory Capacity	Up to 32GB
BIOS	UEFI only
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	ATX
Power Supply Type	ATX
Power Consumption (Typical)	CPU 65W TDP
Dimension (L x W)	203mm x 146mm
Operating Temperature	32°F ~ 122°F (0°C ~ 50°C)
Storage Temperature	-4°F ~ 176°F (-20°C ~ 80°C)
Operating Humidity	0 ~ 90% @ 40°C, non-condensing
MTBF (hours)	TBD
Certification	CE/FCC Class A
display
VGA/LCD Controller	8th Generation Intel® Core Processor family
Video Output	LVDS x 2, CRT x 1, DVI x 1
Backlight inverter supply	18/24bit (2CH)
I/O
Ethernet	Intel® GbE i219 x 1, Intel® GbE i211 x 1
Audio	ALC269 (With Amplifier)
USB Port	USB 3.2 Gen 1 x 4, USB 2.0 x 4 (All headers)
Serial Port	RS232 x 8, RS232/422/485 x 2 (All headers)
Parallel Port	–
HDD Interface	SATA 6.0 Gb/s x 3
FDD Interface	–
SSD	–
Expansion Slot	M.2 3042/2280 Slot (B key) x 1 M.2 2280 Slot (M key) x 1 Half size mPCIe x 1 SMBus/I2C/LPC x 1
PWM LCD Support	–
DIO	16-bit
TPM	TPM 2.0
Touch	–

Packing List

Jumper Cap (9657666600)
Back plate for cooler (M09KBS9000)
PCM-CFS

Optional Accessories

Part Number	Description	Qty
1700190450	USB 3.2 Cable.2 PORTS.w/ bracket 45cm	2
1709100201	USB Cable.2.0mm.W/Bracket 20cm	2
1701100206	COM Cable 20cm	10
1700140510	Audio Cable 51cm	1
1702150155	SATA Power Cable 15cm	1
1709070500	SATA Cable 50cm	3
17592KBS91	CPU Cooler	1

PFM-540I Rev. A

Overview

PFM-540I Rev.A adopts an AMD Geode™ LX800 processor that is more cost effective compared to other PC/104 CPU modules on the market. This model supports DDR333 SODIMM Memory max. 1GB for DDR333 and 512MB for DDR400. Although PFM-540I Rev.A is a small board, it offers the full functions customers demand. The chipset of PFM-540I Rev.A deploys AMD LX800 and CS5536 that makes this board achieve high performance. It features one 10/100Base-TX Ethernet port, four USB 2.0 ports, two serial ports, one parallel port, IR interface, watchdog timer and includes PC/104 expansion.

Applications

Military
Operator Terminal
Transportation
Panel
Aviation
Low Power Consumption

Features

Onboard AMD Geode™ LX800 Processor
AMD Geode™ LX800 + CS5536
DDR 333 MHz SODIMM x 1, Up to 1 GB or DDR 400 MHz SODIMM x 1, Up to 512 MB
10/100Base-TX Ethernet x 1
18/24-bit TTL LCD Support
EIDE x 1, CompactFlash™ x 1
USB2.0 x 4, COM x 2, and Parallel x 1
PC/104 Expansion
+5V Only Operation, AT Power Type
Low Power Consumption

Specifications [PFM-540I REV. A]

system
Form Factor	PC/104
CPU	Onboard AMD Geode™ LX 800
CPU Frequency	500 MHz
Chipset	AMD Geode™ LX 800 + CS5536
Memory Type	DDR333/400, SODIMM x 1, (512 MB for DDR400)
Max. Memory Capacity	1 GB
BIOS	Award 512 KB
Wake on LAN	Yes
Watchdog Timer	255 Levels
Power Requirement	+5V
Power Supply Type	AT
Power Consumption (Typical)	AMD Geode™ LX 800 500 MHz, DDR400 512 MB, 1.53A@+5V
Dimension (L x W)	3.55″ x 3.77″ (90mm x 96mm)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	100,000
Certification	CE/FCC
display
VGA/LCD Controller	AMD Geode™ LX 800
Video Output	CRT, TTL LCD
Backlight inverter supply	—
i/o
Ethernet	10/100Base-TX x 1, Realtek RTL 8139DL
Audio	—
USB Port	USB2.0 x 4
Serial Port	RS-232 x 1, RS-232/422/485 x 1
Parallel Port	SPP/EPP/ECP x 1
HDD Interface	UDMA33 x 1
FDD Interface	FDD x 1
SSD	CompactFlash™
Expansion Slot	PC/104
PWM LCD Support	—
DIO	—
TPM	—
Touch	—

Ordering Information [PFM-540I REV. A]

Part Number	TF-PFM-540I-A10
cpu	AMD Geode™ LX800
ram	SODIMM
fan/ fanless	Fanless
storage	EIDE x 1, CompactFlash™ x 1 FDD x 1
display	CRT + TTL
lvds	18/24b, 1CH
lan	FE x 1
usb	4
rs-232	1
rs-232/422/485	1
parallel	1
expansion slot	PC/104
power	+5V/AT
temp.	0°C ~ 60°C

Packing List

9681540I00 Cable Kit for PFM-540I Rev.A
1701100207 RS-232 Cable x 2
1701440350 44-pin IDE Cable x 1
1700060152 Keyboard & Mouse Cable x 1
1700100200 LAN Cable x 1
1709100201 USB Cable x 2
1701260201 Printer Port Cable x 1
1700160201 VGA Cable, Length 20cm
PFM-540I Rev. A

Optional Accessories

PCM-3538T-A10

TTL to LVDS Transmitter Module Rev. A1.0

PICO-BT01

Overview

The PICO-BT01 is the embedded board with PICO-ITX form factor AAEON developed. It supports Intel®’s Atom™ E3845/E3825 SoC Up to 1.91 GHz. Moreover, the Intel® Atom™ E3845/E3825 SoC offers a high performance computing platform with low power consumption. This new product supports DDR3L SODIMM at speeds of 1066/1333 MHz, up to 8 GB.

One half size Mini-Card and one mSATA interfaces provide ample storages (mSATA can be changed to full size Mini-Card by BOM). With one Gigabit Ethernet, two COM ports, and both USB 3.2 Gen 1 and USB2.0 ports, the PICO-BT01 meets the requirements of today’s demanding applications.

Display requirements are met with an abundance of interfaces such as VGA, DP and LVDS. The PICO-BT01 supports 18/24-bit LVDS with PWM function.

With all of its integrated features, the PICO-BT01 strikes a balance of performance and price. This versatile product targets Industrial Automation, Entertainment, Networking, KIOSK/POS, Transportation, Banking, Healthcare and Digital Signage, applications that require high performance and high reliability.

Flexible Expansion

The PICO-BT01 offers a unique BIO (board-to-board I/O) to connect a Daughter Board for additional I/O port expansion, allowing users to implement their desired features without investing heavily in R&D.

Applications

Building/ Factory Automation
Panel PC
KIOSK
Medical Equipment
Test & Measurement

Features

Onboard Intel® Atom™ E3800/ Celeron® J1900/N2807 Processor SoC
DDR3L 1066/1333 MHz SODIMM x 1, Up to 8 GB
18/24-bit LVDS LCD, CRT Co-lay Display Port
SATA 3.0Gb/s x 1, Mini-Card(Full size)/mSATA(default) x 1
USB 3.2 Gen 1 x 1, USB 2.0 x 2
Gigabit Ethernet x 1, RJ-45 x 1
RS-232 x 1, RS-232/422/485 x 1
Mini-card x 1 (Half size)
4-Bit Digital I/O
BIO Connector for Daughter Board Optional

Specifications [PICO-BT01]

system
Form Factor	Pico-ITX
CPU	Onboard Intel® Atom™ E3845/ Celeron® J1900/N2807 Processor SoC
CPU Frequency	Up to 2.0 GHz
Chipset	Intel® E3845/J1900/N2807
Memory Type	204-pin DDR3L SODIMM x 1, DDR3L 1066/1333, Max. 8GB
Max. Memory Capacity	Up to 8GB
BIOS	AMI/SPI
Wake on LAN	Yes
Watchdog Timer	255 levels
Power Requirement	+12VDC
Power Supply Type	AT/ATX (default) optional lockable connector
Power Consumption (Typical)	Intel® Celeron® J1900 2.0GHz , DDR3L 1333 MHz 8 GB 1.14A@+12V
System Cooling	Heat-spreader, heatsink or cooler optional
Dimension	3.94″ x 2.84″ (100mm x 72mm)
Gross Weight	0.88lb (0.4 kg)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C) or WiTAS 2 (-40˚C ~ 85˚C)
Storage Temperature	-40˚F ~ 176˚F (-40˚C ~ 80˚C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80,000
Certification	CE,FCC
display
Chipset	Intel® E3845/J1900/N2807
Resolution	VGA up to 2048 x 1152 @60Hz or DP up to 2560 x 1400 @60Hz LVDS (18/24-bit) up to 1400 x 900 @60Hz
LCD Interface	18/24-bit Single LVDS
i/o
Storage/SSD	SATA 3.0Gb/s x 1, Mini-Card(Full-size)/mSATA(default) x 1
Ethernet	Intel Gigabit Ethernet, 10/100/1000Base-TX x 1 (Atom E series with I210IT, Celeron J/N series with I211AT)
USB Port	USB 3.2 Gen 1 x 1 Rear IO, USB 2.0 x 1 Rear IO and x 1 Pin header
Serial Port	RS-232 x 1, RS-232/422/485 x 1 (Ring /+5V/+12V)
Audio	Line-out x 1
DIO	4-bit (2-in, 2-out)
Expansion Slot	Mini-Card (Half-size) x 1, BIO x 1
SIM	Option by BIO Board

Ordering Information [PICO-BT01]

Part Number	PICO-BT01-A11-0002	PICO-BT01-A11-0003	PICO-BT01-A11-0004	PICO-BT01-A11-0005	PICO-BT01W2-A11-0003	PICO-BT01W2-A11-0004
cpu	Celeron® N2807 (Dual Core)	Atom™ E3845 (Quad Core)	Atom™ E3825 (Dual Core)	Celeron® J1900 (Quad Core)	Atom™ E3845 (Quad Core)	Atom™ E3825 (Quad Core)
ram	DDR3L, Max. 4GB	DDR3L, Max. 8 GB	DDR3L, Max. 8 GB	DDR3L, Max. 8 GB	DDR3L, Max. 8 GB	DDR3L, Max. 8 GB
fan/fanless	Heat-spreader	Heat-spreader	Heat-spreader	Heat-spreader	Heat-spreader	Heat-spreader
display	DP+LVDS	CRT+LVDS	DP+LVDS	CRT+LVDS	CRT+LVDS	DP+LVDS
lvds	24bit 1CH	24bit 1CH	24bit 1CH	24bit 1CH	24bit 1CH	24bit 1CH
storage	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1	SATAII x 1, Mini-Card (Full size)/mSATA (default) x 1
lan	GbE x 1	GbE x 1	GbE x 1	GbE x 1	GbE x 1	GbE x 1
usb	USB 3.2 Gen 1 x 1, UBS2.0 x 2	USB 3.2 Gen 1 x 1, UBS2.0 x 2	USB 3.2 Gen 1 x 1, UBS2.0 x 2	USB 3.2 Gen 1 x 1, UBS2.0 x 2	USB 3.2 Gen 1 x 1, UBS2.0 x 2	USB 3.2 Gen 1 x 1, UBS2.0 x 2
rs-232	1	1	1	1	1	1
rs-232/422/485	1	1	1	1	1	1
expansion slot	Mini-card x 1 (Half size), DIO 4-bit	Mini-card x 1 (Half size), DIO 4-bit	Mini-card x 1 (Half size), DIO 4-bit	Mini-card x 1 (Half size), DIO 4-bit	Mini-card x 1 (Half size), DIO 4-bit	Mini-card x 1 (Half size), DIO 4-bit
power	+12V (Terminal block)	+12V (Terminal block)	+12V (Terminal block)	+12V (Terminal block)	+12V (Terminal block)	+12V (Terminal block)
temp	32°F ~ 131°F (0°C ~ 60°C)	32°F ~ 131°F (0°C ~ 60°C)	32°F ~ 131°F (0°C ~ 60°C)	32°F ~ 131°F (0°C ~ 60°C)	WiTAS 2 (-40°C ~85°C)	WiTAS 2 (-40°C ~85°C)
others	Line-out	Line-out, BIO x 1	Line-out	Line-out	Line-out, BIO x 1	Line-out

Packing List

PICO-BT01-HSP01: Heat Spreader
1703200153: COM x 2, Line-out Cable
PICO-BT01

Optional Accessories

Part Number	Description	Qty.
1709070500	SATA Cable	1
1702150155	SATA Power Cable	1
1702040167	Power/FAN Cable 16cm	1
PICO-BT01-FAN01	CPU Cooler.845322.2mm.Silver.used with HSP	1
PICO-BT01W1-HSK01	Heatsink for E3845 WiTAS1. To be used with heat Spreader.	1
PICO-BT01-HSK01	Heatsink for standand product.To be used with heat Spreader.	1
1700050207	USB Cable 20cm	—

RICO-3288

Overview

The AAEON RICO-3288 single board computer is a RISC platform built on a compact PICO-ITX form factor and featuring the Rockchip RK3288 ARM Cortex™ A17 quad-core processor, 4K Ultra HD capabilities, and a wide array of I/O features. Preloaded with Android 6.0, the RICO-3288 is an SBC that is built to be powerful, flexible, customizable, and ready to go out of the box.

Powered by the Rockchip RK3288 ARM Cortex™ A17 quad-core processor and built on the PICO-ITX form factor, the RICO-3288 packs a lot of power into a compact package. It’s equipped to deliver 4K Ultra HD video at 60Hz through HDMI 2.0, making it suitable for applications that require 4K video decode capabilities. With its fanless design and utilizing RISC architecture, the RICO-3288 is energy efficient, making it perfect for mobile applications.

The RICO-3288 is designed to be flexible to meet our customer’s application requirements. It boasts a wide array of I/O features, including USB 2.0, Micro USB On-the-Go (USB OTG), 4G LTE, SD expansion slots, and an on-board IO connection for daughter boards, giving it almost endless expansion capabilities.

The RICO-3288 is also designed to be a go-anywhere RISC platform. On top of the PICO-ITX form factor and fanless design giving it a small, compact size that will fit into just about anywhere, the RICO-3288 is also designed to be rugged so that it can go anywhere. The RICO-3288 is perfect for usage in applications such as digital signage and interactive displays, home automation, fleet management, and data acquisition.

Our customers’ applications are as unique as our customers. To meet the individual requirements of our customers, the RICO-3288 SBC can be customized from the factory to reduce turnaround, shorten time-to-market, and provide the ability for rapid APP deployment. The RICO-3288 comes preloaded with Android 6.0 as standard, which can be customized to suit our customers’ APP development needs. It also comes standard with our SDK which provides a powerful tool for processor management and profile customization.

Power your next project with the compact, powerful, 4K Ultra HD capable AAEON RICO-3288. Flexible and customizable, and featuring the Rockchip RK3288 ARM Cortex™ quad-core processor, the RICO-3288 SBC is the turnkey RISC platform to meet your application requirements. Buy one today through our eShop, and experience the performance for yourself.

Features

Rockchip RK3288
Onboard DDR3L 2GB
Onboard eMMC 16GB and Micro-SD Card Slot
HDMI (1.4), eDP, LVDS, MIPI
WiFi 802.11 a/b/g/n/ac, BT V4.2, GPS (Optional), NFC (Optional)
GbE: RJ45 x 1
USB 2.0: Micro-USB OTG x 1, Type A x 2, Pin Header x 1
RS-232/422/485 x 1, RS-232 x 1
8-bit GPIO, I2C, mPCIe Slot x 1
+12V DC Input
OS Support: Android 6.0 / Debian
Small Board Size: 100mm x 72mm (PICO-ITX)

Specifications [RICO-3288]

system
Form Factor	Pico-ITX (100mm x 72mm)
CPU	Rockchip RK3288 ARM Cortex™-A17 Quad-core 1.6 GHz
GPU	Mali-T764
Graphics	Video Decode: MPEG-1, MPEG-2, MPEG-4, H.263, H.264, AVS, VC-1, VP8, MVC Video Encode: H.264 (BP@level4.0, MP@level4.0, HP@level4.0), MVC and VP8
Memory Capacity	Onboard DDR3L 2GB
Storage/SSD	16GB eMMC and Micro SD card
Operating System	Android 6.0
Kernel	Kernal 4.4
Watchdog Timer	Integrated
Power Requirement	+12V DC input, Optional 7.4V battery
Power Consumption (Typical)	0.6A@12V, full load, Quad-core CPU
Dimension	3.94″ x 2.84″ (100mm x 72mm)
Gross Weight	0.44 lb (0.2 Kg)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40˚F ~ 176˚F (-40˚C ~ 80˚C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80,000
Certification	CE/FCC
display
HDMI	HDMI(1.4) up to 4k x 2k @60Hz
eDP	Up to 2560 x 1440 @60Hz
LVDS	support 18/24-bit up to 1920 x 1080 @60Hz
MIPI	Up to 2560 x 1440 @60Hz
rf function
Wi-Fi	802.11 a/b/g/n/ac
Bluetooth	Bluetooth V4.2 + EDR
i/o
Ethernet	GbE x 1
USB Port	Micro-USB OTG x 1 USB 2.0 Type A x 2 USB2.0 Pin header x 1 (Integrated)
Serial Port	RS-232/422/485 x 1 RS-232 Pin header x 1 Debug port pin header x 1
Audio	2.5W (by 4Ω) Speaker/ Microphone/ Earphone
GPIO	8-bit (4-in, 4-out)
Expansion Slot	Full-size mini-PCIe slot x 1 (For 3G/4G card)
SIM Slot	Nano-SIM
SD Socket	Supports Micro SD card
Camera	—

Ordering Information [RICO-3288]

Part Number	RICO-3288-A11-0001
cpu	ARM Cortex-A17 1.6GHz
ram	2GB DDR3L
storage	16GB eMMC
lan	GbE x 1
rs-232	1 (RS-232) 1 (RS-232/422/485)
usb	4
display	1 (HDMI) 1 (eDP) 1 (LVDS) 1 (MIPI)
wifi & bt	802.11 a/b/g/n/ac BT 4.2 + EDR
3g/lte slot	1 (mPCIe Slot)

Packing List

MB Power Cable
RTC Battery
RICO-3288

Optional Accessories

Part Number	Description	Qty.
1701090150	COM Cable, Length 15cm	1
125530060Y	12V 60W Power Adapter	1
9697T41704-S	NFC Board	1
9697T47700-D	GPS & Battery Charger Board	1

RICO-3288MINI

Overview

The RICO-3288MINI is a PICO-ITX RISC SBC built to bring the stability and efficiency of ARM processors in a package that won’t bust your budget. With a back-to-basics approach, this RISC SBC combines the Rockchip RK3288 ARM Cortex A17 quadcore processor with Android 6.0 and a minimalist design to help power applications from edge computing to brilliant displays and kiosks. Low energy consumption is perfect to reduce operations costs, or even power battery dependent projects. The RICO-3288MINI RISC SBC is designed to operate in almost any environment, in temperatures from 0°C to 60°C; and fanless operation allows the board to be deployed within enclosures and tight spaces, providing reliable, consistent performance. AAEON also provides customization services, ensuring our RISC SBC can fit your project’s needs.

Features

Rockchip RK3288
Onboard DDR3L 2GB
Onboard eMMC 16GB
HDMI (1.4): Up to 4K x 2K @ 60Hz
GbE: RJ45 x 1
USB 2.0: Micro-USB OTG x 1, Type A x 2
8-bit GPIO
+12V DC Input
OS Support: Android 9.0 / Debian
Small Board Size: 100mm x 72mm (PICO-ITX)

Specifications [RICO-3288MINI]

system
Form Factor	Pico-ITX (100mm x 72mm)
CPU	Rockchip RK3288 ARM Cortex™-A17 Quad-core 1.6 GHz
GPU	Mali-T764
Graphics	Video Decode: MPEG-1, MPEG-2, MPEG-4, H.263, H.264, AVS, VC-1, VP8, MVC Video Encode: H.264 (BP@level4.0, MP@level4.0, HP@level4.0), MVC and VP8
Memory Capacity	Onboard DDR3L 2GB
Storage/SSD	16GB eMMC
Operating System	Android 9.0
Kernel	Kernal 4.4
Watchdog Timer	Integrated
Power Requirement	+12V DC input
Power Consumption (Typical)	0.6A@12V, full load, Quad-core CPU
Dimension	3.94″ x 2.84″ (100mm x 72mm)
Gross Weight	0.22 lb (0.1 Kg)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40˚F ~ 176˚F (-40˚C ~ 80˚C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80000
Certification	CE/FCC
display
HDMI	HDMI (1.4) up to 4K x 2K @60Hz
eDP	—
LVDS	—
MIPI	—
rf function
Wi-Fi	—
Bluetooth	—
i/o
Ethernet	GbE x 1
USB Port	Micro-USB OTG x 1 USB 2.0 Type A x 2
Serial Port	—
Audio	—
GPIO	8-bit (4-in, 4-out)
Expansion Slot	—
SIM Slot	—
SD Socket	—
Camera	—

Ordering Information [RICO-3288MINI]

Part Number	RICO-3288MINI-A11-0001
cpu	ARM Cortex-A17 1.6GHz
ram	2GB DDR3L
storage	16GB eMMC
lan	GbE x 1
rs-232/422/485	—
usb	3
hdmi	1
wifi & bt	—
3g/lte slot	—

Packing List

MB Power Cable
RTC Battery
RICO-3288MINI

Optional Accessories

Part Number	Description	Qty
125530060Y	12V/60W Power Adapter	1

RICO-3399

Overview

The RICO-3399 single board computer is a RISC platform that is designed to meet the requirements of a wide range of applications, from digital signage and KIOSK to intelligent cameras and machine learning applications. Armed with the powerful Rockchip RK3399 ARM hexa-core processor, capable of 4K Ultra HD, built on the PICO-ITX form factor, and featuring a fanless design; the RICO-3399 SBC is designed to deliver out-of-the-box brains and brawn to tackle any application.

Powered by the Rockchip RK3399 ARM hexa-core processor, the RICO-3399 SBC has the brains and brawn to tackle your application requirements. Utilizing the latest in ARM and RISC technology, the Rockchip RK3399 ARM hexa-core processor is a SoC that combines two processors into one, splitting computing and graphics tasks between the two processors. The RICO-3399 teams up the processor with a built-in Mali-T860MP4 GPU, a GPU that is 50% faster than its previous generation, to provide the strength for 4K video decode applications and 4K Ultra HD graphics at 60Hz through HDMI 2.0. The RICO-3399 also features onboard 16GM eMMC storage, and 2GB LPDDR3 memory, giving it the intelligence to power machine learning and computer vision applications.

The RICO-3399 SBC combines a fanless design, RISC architecture, and the PICO-ITX form factor to be a platform that is powerful and energy conscious. In addition, these features allow it to squeeze into almost any application that requires a tight fit. Being small doesn’t mean sacrificing flexibility and expandability. The RICO-3399 features a wide array of I/O interfaces, including USB 2.0, USB 3.0, USB C, microSD slot, and MIPI camera support. The RICO-3399 also features both a nanoSIM and a mini-PCIe slot to provide 3G and 4G capabilities, making the RICO-3399 a mobile platform.

AAEON’s manufacturer services offer both hardware and software customization options that ensure the RICO-3399 SBC will be ready to go the moment you open the box. The RICO-3399 comes standard with Android 7.1, which can be tailored at the factory to suit your needs. Further customization options are available to help reduce turnaround, speed up development and ensure rapid APP deployment. AAEON will work directly with you to ensure your requirements are met.

The RICO-3399 SBC powered by Rockchip RK3399 ARM hexa-core utilizes RISC architecture to deliver the brawn of 4K Ultra HD graphics, the brains of intelligent camera systems, and the compact package of the PICO-ITX form factor.

Applications

Digital Signage
Home Automation
KIOSK
Facial Recognition

Features

Rockchip RK3399
Onboard LPDDR3 2GB/4GB (Optional)
Onboard eMMC 16GB and Micro-SD Card Slot
HDMI (2.0), eDP
WiFi 802.11 a/b/g/n/ac, BT V4.2, GPS (Optional), NFC (Optional)
GbE: RJ45 x 1
USB 3.2 Gen 1: OTG x 1, Type A x 1
USB 2.0: Type A x 1, Pin Header x 1
RS-232/422/485 x 1, RS-232 x 1
8-bit GPIO, I2C, mPCIe Slot x 1
+12V DC Input
OS Support: Android 8.1
Small Board Size: 100mm x 72mm (PICO-ITX)

Specifications [RICO-3399]

system
Form Factor	Pico-ITX
CPU	Rockchip RK3399 Cortex™-A72 Dual-core 1.8GHz and Cortex™-A53 Quad-core 1.4GHz
GPU	Mali-T864
Graphics	Video Decode: MPEG-1, MPEG-2, MPEG-4, H.263, H.264, H.265, VC-1, VP9, VP8, MVC Video Encode: H.264 UP to HP@level4.1, MVC and VP8
Memory Capacity	Onboard LPDDR3 2GB/4GB (Optional)
Storage/SSD	16GB eMMC and Micro SD card
Operating System	Android 8.1
Kernel	Kernel 4.4
Watchdog Timer	Integrated
Power Requirement	+12V DC input
Power Consumption (Typical)	0.6A@12V, full load, Hexa core
Dimension	3.94″ x 2.84″ (100mm x 72mm)
Gross Weight	0.44 lb (0.2 Kg)
Operating Temperature	32°F ~ 140°F (0°C ~ 60°C)
Storage Temperature	-40°F ~ 176°F (-40°C ~ 80°C)
Operating Humidity	0% ~ 90% relative humidity, non-condensing
MTBF (hours)	80,000
Certification	CE/FCC
display
HDMI	HDMI(2.0) up to 4k x 2k @60Hz
eDP	Up to 4k x 2k @60Hz
LVDS	—
MIPI	—
rf function
Wi-Fi	802.11 a/b/g/n/ac
Bluetooth	Bluetooth V4.2 + EDR
i/o
Ethernet	GbE x 1
USB Port	USB 3.2 Gen 1 Type C OTG x 1 USB 3.2 Gen 1 (Bottom)/USB 2.0 (Top) dual port x 1 USB 2.0 Pin Header x 1 (Integrated)
Serial Port	RS-232/422/485 x 1, RS-232 Pin header x 1, Debug port pin header x 1
Audio	2.5W (by 4Ω) Speaker/ Microphone/ Earphone
GPIO	8-bit (4-in, 4-out)
Expansion Slot	Full-size mini-PCIe slot x 1 (For 3G/4G card)
SIM Slot	Nano-SIM
SD Socket	Supports Micro SD card
Camera	—

Ordering Information [RICO-3399]

Part Number	RICO-3399-A10-0001	RICO-3399-A10-0002	RICO-3399-A10-0003(MOQ: 50)
cpu	ARM Dual Cortex-A72 + Quad Cortex-A53	ARM Dual Cortex-A72 + Quad Cortex-A53	ARM Dual Cortex-A72 + Quad Cortex-A53
ram	2GB LPDDR3	2GB LPDDR3	4GB LPDDR3
storage	16GB eMMC	16GB eMMC	16GB eMMC
lan	GbE x 1	GbE x 1	GbE x 1
rs-232	1 (RS-232) 1 (RS-232/422/485)	1 (RS-232) 1 (RS-232/422/485)	1 (RS-232) 1 (RS-232/422/485)
usb	4	4	4
display	1 (HDMI) 1 (eDP)	1 (HDMI)	1 (HDMI) 1 (eDP)
wifi & bt	802.11 a/b/g/n/ac BT 4.2 + EDR	—	802.11 a/b/g/n/ac BT 4.2 + EDR
3g/lte slot	1 (mPCIe Slot)	—	1 (mPCIe Slot)

Packing List

MB Power Cable
RTC Battery
RICO-3399

Optional Accessories

Part Number	Description	Qty.
1701090150	COM Cable, Length 15cm	1
125530060Y	12V 60W Power Adapter	1
9697T41703-S	NFC Board	1
9697T47700-D	GPS & Battery Charger Board	1